

RTD 与热敏电阻
高精度Pt100温度传感器
精度0.006–0.1°C,可提供校准证书
型号 TR02129
有现货 · 1–4 个工作日备货
产品概述
产品概述
高精度Pt100温度传感器用于实验室、计量台和关键过程测量,采用筛选Pt100元件和防水耐腐蚀探头,可提供校准证书。
主要特点
- Pt100元件
- 精度0.006–0.1°C
- 防水耐腐蚀探头
- 可提供校准证书
典型应用
- 校准实验室
- 计量和参考测量
- 制药食品验证
- 半导体和研究设备
订货编码
每个 DOCOROM 高精度铂电阻 都有一个固定的订货编码,从左到右依次为:
TR02129-P1-100-4W-X-X-X-B
- TR02129 — 系列:高精度铂电阻
- P1 — Pt100 铂电阻(IEC 60751)
- 100 — 校准精度 0.1 °C
- 4W — 四线制
- X — 无过程连接(系列标准)
- X — 按系列标准(固定)
- X — 电缆长度和材质随订单确认
- B — 裸线端
标准配置: TR02129-P1-100-4W-X-X-X-B。
本页下方的订货编码表列出每种可选配置的完整编码。未列出的规格,请提供最接近的编码并注明需要更改的螺纹、插入长度、电缆或接线端,我们会在生产前确认最终编码。可提供校准证书和定制长度,下单时请注明校准点。完整的编码规则见 DOCOROM 订货编码指南。
目录编号:TR/02129(网站/ERP 写法:TR02129)。
技术参数
| Element | Pt100 |
|---|---|
| Accuracy | 0.006–0.1 °C |
| Probe | Waterproof, corrosion-resistant |
| Calibration | Certificate available |
| DOCOROM model | TR02129 |
| Catalogue range | -50…260 °C |
| Ordering code | TR02129-P1-100-4W-X-X-X-B |
| Code format | Series-Element-Accuracy-Circuit-Connection-Length-Cable-Termination |
| Catalogue reference | TR/02129 |
订货编码
每种配置对应一个完整的 DOCOROM 订货编码,下单时可直接引用。需要其他组合时,请提供最接近的编码并注明更改项。 查看完整编码规则.
| 配置 | 订货编码 |
|---|---|
| Pt100, 0.1 °C accuracy | TR02129-P1-100-4W-X-X-X-B |
| High-accuracy display, rechargeable | TR02129-P1-100-4W-X-X-X-B-DSP |
| Pt100, 0.06 °C accuracy | TR02129-P1-060-4W-X-X-X-B |
| Pt100, 0.03 °C accuracy | TR02129-P1-030-4W-X-X-X-B |
| Pt100, 0.006 °C accuracy | TR02129-P1-006-4W-X-X-X-B |
| Pt100, 0.01 °C accuracy | TR02129-P1-010-4W-X-X-X-B |
常见问题
What accuracy can you achieve?
0.006–0.1 °C depending on the element, calibration points and uncertainty requirement.
Is a calibration certificate included?
A certificate can be supplied; tell us the points and uncertainty you need.
Can it be used as a reference probe?
Yes, with the appropriate calibration and handling; discuss your reference setup with us.
How do I order a specific configuration?
Quote the ordering code shown in the table (for example TR02129-P1-100-4W-X-X-X-B), or send the thread, insertion length, cable and connector requirements and we will confirm the code before production.
发货与资料
DHL / FedEx 快递,全球 3–6 个工作日。除书面约定 DDP 外,关税与税费由收件方承担。
每支均随附:三点校准证书、材质追溯表和接线图。可应要求提供 2D/3D 图纸。


